Yay or nay?
Discover what the internet is saying about SUNLU.
Upgraded Reviews scanned the web to find out what real users are saying about SUNLU.
See the highlights below and decide for yourself!
Table of contents
- ✅ Pros
- ❌ Cons
- ⚖️ Summaries
- 💸 Top Discount
✅ Pros
“It prevents common printing errors such as stringing or bubbles.”
“From our experiments, it clearly does a good job of drying the filament and improving print quality.”
“At the end of the construction, after finishing the last layer, the head will automatically go up so as to allow us to remove the magnetic plate and detach the object.”
“This goes for £23.99 on Amazon, which isn’t a lot more than a roll of basic PLA, so it’s a fairly economical filament.”
“I used over 50KG of SUNLU filament in the last few years because of it’s price to quality ratio.”
“It has average cost per liter while being extremely strong.”
“Temperature range from 35-70 °C.”
“The filament can be fed directly from the dryer to the printer.”
“The reel spins on iron rollers with bearings, which rotate easily and can be removed for maintenance.”
“It is easy to assemble.”
“The assembly instructions are clear and the bags are correctly labeled, so it takes about 15 minutes to get together.”
“Clog detection is also available.”
“There’s also filament runout detection and power loss resume, both of which I tested and they do work.”
“Sunlu T3comes in a very sturdy cardboard box with a preformed foam padding containing everything you need to mount your printer.”
“Filament comes sealed in in vacuum with Silica gel sachet.”
“Durable resin makes it a great resin for everyday use.”
“You can turn on Filadryer S2 by double-tapping on its screen, which is incredibly large, bright, and touch-sensitive.”
“1 year warranty is available.”
“It has inexpensive retail price.”
“The T3 comes mostly assembled.”
“It’s a sturdy 3D printer with its all-metal frame.”
“You can easily read what it shows from approximately 9.8 feet (3 meters).”
“What sets it apart from standard PLA is that it isn’t all the same colour.”
“It has clog detection and auto-resume features.”
“The SUNLU S2 filament dryer fan is pretty quiet.”
“Tthe new SUNLU filament dryer box supports temperatures from 113 to 158 ℉ (45 to 70 ℃).”
“I like the price point.”
“It has standard platform for ease of further customization and repairs.”
“During the printing phase you will notice how Sunlu T3moves smoothly and without jerks going to build the object in groups of layers composed of external and internal structure.”
“It offers auto-leveling with 16 points.”
“Fans are powerful indeed.”
“It dries each filament within 3-6 hours.”
“I’ve printed PLA, PETG and ABS from them and I was happy with the results I got.”
“Features like the automatic humidity control mode allow you to use the S4 as a storage solution for more sensitive filament types.”
“I have used almost the whole 1Kg spool and haven’t had any Jams or clogs, no tangled filament or any other issues.”
“Similarly to its predecessor, SUNLU S4 stands out with its futuristic look.”
“Sunlu advertises the T3 as being able to print at speeds up to 250 mm/s, a substantial improvement from the typical 45-50 mm/s found on the default profiles for printers like the Creality Ender 3 Pro and the Prusa MK3S+.”
“It has silent stepper drivers and quiet mechanical system.”
“The hardware can certainly handle the blazing speeds.”
“The S1 Plus comes with all the same features but also has a fan installed to prevent overheating and aid in water removal.”
“We tried various layer settings, various extrusion speeds and filaments and the sensations that Sunlu T3 gave us are great.”
“It has simple assembly.”
“It is suitable for PLA, PLA, Wood, PETG, PVB, ABS, HIPS, PVA, ASA, TPU, PMMA, PA, and PC.”
“Common upgrades are built in.”
“The original Filadryer S1, priced at around $40, includes a temperature controller and timer.”
“The 4-roll capacity is unmatched by other dryers.”
“They boast a tolerance of +- 0.02mm and most of the time that’s true.”
“Another reason why I mostly order SUNLU filament is because it gets delivered relatively fast from their EU warehouse when ordering from their website.”
“Sunlu claims that their novel acrylonitrile butadiene styrene ratio in the Easy ABS filament has created a significantly more printable ABS without sacrificing the material’s functional properties.”
“It comes with a full featured menu system.”
“It has filament run-out detection feature.”
“For decorative objects the subtle shift from one colour to the next looks amazing.”
“At £17.99 I would say that SunLu PLA+ sits at more at mid range price.”
“Easy ABS’ advantages include a lower printing temperature and no enclosure necessary.”
“In addition to PLA and PETG, Sunlu offers a recycled ABS option made from production waste.”
“The printer is reliable, fast and intuitive.”
“The colour change is also extremely attractive.”
“We found the dryer easy to use, with simple controls and an intuitive physical design.”
“SUNLU works well with four 1kg filament rolls.”
“Good detail reproduction makes it suitable for tabletop gaming while having great durability for tumbles and falls.”
“It has all metal extruder.”
“It fed flawlessly in the Ender and, with a 200°C nozzle temperature and the bed at 50°C, gave a great, unblemished end result.”
💸 Top Current Discount
❌ Cons
“There are minor imperfections in construction.”
“I’d like to change the quality control in testing process and firmware release.”
“Default Power Loss Recovery creates visible defects.”
“Due to some of the issues with the prints and the non pure white I can’t give SunLu PLA+ a very high rating.”
“Automatic build platform leveling still requires manual input.”
“The unit is quite large and will take up a substantial amount of space on a desk or shelf, and if you want to feed filament directly from the S4 to your 3D printer, you’ll need that extra space to be located near your printer.”
“Spool holder is too thin.”
“Availability of pre-sliced test prints on the included SD card for gcode reference.”
“Fans are noisy.”
“SUNLU provides a version of CURA on the USB drive for slicing, but oddly does not provide any print profiles.”
“When printing my first models I found issues with bed adhesion.”
“Wireless printing capability would be great.”
“Having included printer profiles would make that process better for new users.”
“Fast Print mode results in poor quality models.”
“Manual setup is needed in slicing software.”
“Would have been great to include a resealable bag for when the filament is not in use.”
“Normally a brief pause wouldn’t be a big deal but when printing at 250mm/s, the extrusion pressure is so great that a small dot forms in that spot, and after a few layers of that, the dot grows into a blob and then snowballs into a failed print.”
“Black colour contaminates isopropyl alcohol quickly, which increases operating costs.”
“Fast mode needs work.”
“Included software doesn’t include a profile.”
“The only downside to this filament is that it doesn’t work well on small prints.”
“Relatively strong odour requires a well ventilated room to print.”
⚖️ Final Say
Read the summaries of what reviewers think about SUNLU below.
“This SUNLU filament dryer has many more pros than cons and will find its buyer. Gambody believes every 3D printing enthusiast should have a 3D printer filament dryer box in their arsenal, especially on rainy and humid days. The SUNLU S2 fully complies with its promised characteristics. It performs well in drying PLA, ABS, PETG, and other filaments, while its cute ring light makes the process more enjoyable.”
“The Sunlu T3 is a very capable 3D printer worthy of a spot on anybody’s workbench. The combination of fair price, plentiful features, and included spare parts makes the Terminator 3 a very competitive printer in the lower budget segment of the 3D printer market.”
“I am really pleased to have SUNLU FilaDryer S4 along with my FDM 3D Printers. Over the years, I’ve accumulated a lot of half-empty spools that have lost their quality due to humidity. Now I can refresh them four spools at once. It is definitely a good device for FDM 3D printer workshops. Also, it can be a fancy alternative to a filament storage box for casual 3D printer users as well.”
“Sunlu’s ABS-like resin offers a great balance of print quality, durability, and affordability. In fact, it is one of the most balanced resins we have reviewed, making it a great all-rounder resin. We think that tabletop gamers looking for a great general-purpose resin that offers great detail reproduction, coupled with a good level of durability that can take the rigors of spirited gaming, would be the ideal audience for it.”
“Pushing a less-intimidating T3 name over its Terminator 3 title at launch, SUNLU offers tremendous speeds if you have the filament to match. The T3 is relatively simple to construct and easy to use if you’re willing to learn, but you’ll need to manually define its configuration in most slicing software. It’s a great first choice for any adventurous hobbyist looking to enter the world of FDM 3D printing.”
“SUNLU is a cheap 3D printing filament for everyday use.”
“If you want to print something large and decorative I highly recommend it.”
“The Sunlu FilaDryer S2 is suitable for anyone who has problems with wet filament. Especially when using Nylon, PVA and PETG this filament dryer is particularly suitable, but also PLA can benefit from drying.”
“The SUNLU T3 3D printer is a feature packed 3D printer at a price point that makes it a very compelling option. The features are all generally well-executed, although some bugs exist that will require some time and patience to work through. Once dialed in the printer works quite well, and I would recommend it.”
“Overall, we’re impressed with the Sunlu FilaDryer S4, and we’ve seen great results from it, especially when printing TPU. If you need to dry multiple rolls of filament at once and have enough space for the machine, we think it’s a worthwhile addition to your 3D printing setup.”
“We printed with the Sunlu T3using various materials, from PLA to ABS to PETG obtaining excellent results (and some failure due to external factors) both in terms of quality and speed. Thanks to its 250mm/s objects are built quickly and without major aesthetic defects (nothing that a shot of sandpaper can solve anyway). Sunlu T3 isa reliable printer full of small tricks that facilitate the overall experience making it even exciting in some moments.”
“The Sunlu T3 is an interesting 3D printer that makes some bold claims, but I didn’t feel that Sunlu accomplished the intended goal of unseating other fast machines like the $799 AnkerMake M5. Enabling “Fast Print” simply increases the print speed without consideration to the overall printing process, which is an area other manufacturers have spent time and energy trying to improve.”
“Overall, the SUNLU T3 is a solid printer with some serious output potential. If small batch production or fast turnaround times are important to you, the T3 will serve you well.”
“Sunlu’s improved PLA+ gives the maker a modified PLA with reportedly more temperature resistance, mechanical integrity, and improved dimensional accuracy, without sacrificing printability.”
“Filament can become very expensive and the search for quality and acceptable price is not an easy one. SunLu filament fits well as a budget product compared to more expensive filaments. The quality of the prints although not perfect is very good and with a bit of post processing most of the issues can be deal with. One of the big issues with lower price filaments is the potential for jamming and clogging and I haven’t experienced any issues with SunLu PLA+”